Canon Oce PlotWave 500 - Page 22

Application /Function‐
ality
System Supported security lev‐
els (x) and open port
Port used on the
controller: protocol
N* M* H*
Océ Publisher Mobile Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
TCP 515
TCP
4242
ICMP
UDP
515
TCP 21
(4)
TCP 515: LPR
(3)
TCP 21: FTP
(4)
TCP 4242: FTP pas-
sive mode
(6)
ICMP: ping
UDP 515: Océ proto-
col (for printer dis-
covery)
Océ Mobile WebTools Océ PlotWave 350
Océ PlotWave 900
R1.2 and higher
x
TCP 80
x
TCP 80
TCP 80: HTTP
Océ ReproDesk Studio Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
TCP 515
TCP
65200
x
TCP
515
TCP
65200
TCP 515: LPR
TCP 65200: Océ
back-channel
(**)
Novell NDPS printing Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
TCP 515
x
TCP
515
x
TCP
515
TCP 515: LPR
LPR printing (com-
mand line)
Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
TCP 515
x
TCP
515
x
TCP
515
TCP 515: LPR
FTP printing Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900R1.x
Océ ColorWave 300
x
TCP 21
TCP
4242
x
(5)
TCP 21
TCP 21: FTP
TCP 4242: FTP
(6)
Notes:
• * Levels: N: Normal - M: Medium - H: High
•
(**)
Océ back-channel is an Océ proprietary protocol used to retrieve information from the
printer (status, media loaded...) and to display it in the application or driver.
•
(1)
LPR printing with back-channel and advanced accounting
•
(2)
LPR printing. No back-channel. No advanced accounting
•
(3)
Océ Publisher Mobile v 2.2 and later for Android, and for Océ Publisher Mobile v 2.3 and
later for iOS
•
(4)
Only for Océ Publisher Mobile v 2.0 to v 2.2 for iOS
•
(5)
FTP active mode only
•
(6)
Data channel for FTP passive mode
Applications, protocols and ports used in the Océ PlotWave 300, the Océ PlotWave 350, the Océ PlotWave 900 R1.x and Océ
ColorWave 300 systems
22
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300