Canon Oce PlotWave 500 - Page 25

Application /Function‐
ality
System Supported security lev‐
els (x) and open port
Port used on the
controller: protocol
N* M* H*
Océ Service Logic Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
TCP 21
TCP
4242
x
(1)
TCP 21
TCP 21: FTP
TCP 4242: FTP
(2)
IPsec Océ PlotWave 300/
PlotWave 350
Océ ColorWave 300
Océ PlotWave 900
R1.2 and higher
x
UDP
500
UDP
4500
UDP 500
UDP 4500
Océ Remote Meter
Reading Manager
Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
x
UDP
161
UDP 161: SNMP
Océ Remote Service Océ PlotWave 300
R1.5 and higher
PlotWave 350 R1.5
and higher
Océ PlotWave 900
R1.x
Océ ColorWave 300
R1.5 and higher
x x x HTTPS outgoing
connection required:
TCP/IP port 443
(3)
Notes:
• * Levels: N: Normal - M: Medium - H: High
•
(**)
The name resolution is mainly used to determine the IP address of the scan destination
during Scan fo File operation
•
(1)
FTP active mode only
•
(2)
Data channel for FTP passive mode
•
(3)
TCP/IP port 443 must be opened and must allow response back on the IT infrastructure
firewall.
Applications, protocols and ports used in the Océ PlotWave 300, the Océ PlotWave 350, the Océ PlotWave 900 R1.x and Océ
ColorWave 300 systems
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
25