Canon Oce PlotWave 500 - Page 65

Application /Function‐
ality
System Supported security levels (x) and
open port
Port used on the
controller: proto‐
col
N* M* M-H* H*
Océ Publisher Mobile Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 21
TCP
4242
ICMP
UDP
515
TCP 21: FTP
TCP 4242: FTP
passive mode
(6)
ICMP: ping
UDP 515: Océ pro-
tocol (for printer
discovery)
Océ Mobile WebTools Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 80
x
TCP 80
TCP 80: HTTP
Océ ReproDesk Studio Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 515
TCP
65200
x
TCP 515
TCP
65200
TCP 515: LPR
TCP 65200: Océ
back-channel
(**)
Novell NDPS printing Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 515
x
TCP 515
x
TCP
515
x
TCP
515
TCP 515: LPR
LPR printing (com-
mand line)
Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 515
x
TCP 515
x
TCP
515
x
TCP
515
TCP 515: LPR
FTP printing Océ Plot-
Wave 750 /
PlotWave
900 R2.x
x
TCP 21
TCP
4242
x
(3)
TCP 21
TCP 21: FTP
TCP 4242: FTP
(4)
Notes:
• * Levels: N: Normal - M: Medium - M-H: Medium/High - H: High
•
(**)
Océ back-channel is an Océ proprietary protocol used to retrieve information from the
printer (status, media loaded...) and to display it in the application or driver.
•
(1)
LPR printing with back-channel and advanced accounting
•
(2)
LPR printing. No back-channel. No advanced accounting
•
(3)
FTP active mode only
•
(4)
Data channel for FTP passive mode
Applications, protocols and ports used on the Océ PlotWave 750 and the Océ PlotWave 900 R2.x systems
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
65