Home > Overview of the Machine > Inserting the Memory Card > Inserting the Memory Card
C078
Inserting the Memory Card
Important
When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is
flashing, the machine is accessing the memory card. In this case, do not touch the area around the
card slot.
Note
When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot
print image data from the memory card or save scanned data on the memory card using the
operation panel of the machine. After using the card slot as the memory card drive of a computer,
remove the memory card, select Device user settings in Device settings of Setup on the HOME
screen, then set Read/write attribute to Not writable from PC.
Setting Up the Card Slot as the Memory Card Drive of the Computer
When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the operation panel, the photos may not be printed properly.
1. Prepare your memory card.
Attach a special card adapter if your memory card requires one.
Before Inserting the Memory Card
2. Turn on the power.
3. Insert only one memory card into the card slot.
The location to insert a memory card varies depending on each type of memory card. Insert your
memory card straightforward WITH THE LABELED SIDE FACING UP into the card slot, according to
the insert location in the figure below.
When the memory card is inserted properly, the Access lamp (A) will light up.
Be sure to attach the card adapter for memory card with the mark
(asterisk), and then insert it into
the card slot as shown below.
Insert the following types of memory cards into the upper card slot:
Memory Stick Duo, Memory Stick PRO Duo
Memory Stick Micro (with the Duo size adapter)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
