Home > Troubleshooting > Problems with Network Communication > Cannot Detect a Machine on a Network
> Cannot Detect the Machine When Setting up Network Communication > Cannot Detect the Machine with
the Wireless LAN: Check 4
N059
Cannot Detect the Machine with the Wireless LAN: Check 4
Is the machine connected to the access point?
By using the operation panel of the machine, make sure that the machine is connected to the access
point.
Select Setup on the HOME screen, then select Device settings > LAN settings > Confirm LAN
settings > WLAN setting list.
Make sure that Connection on the LCD is set to Active.
If Connection is set to Inactive:
The machine may be placed far away from the access point. Place the machine near the access
point temporarily, then click Redetect on the Check Printer Settings screen.
When the machine is detected, follow the instructions on the screen to continue to set up the
network communication.
If the machine cannot be detected, the machine is not connected to the access point. Connect the
machine to the access point.
Click Back to Top on the Check Printer Settings screen to try to set up the network communication
from the beginning.
If Connection is set to Active:
Check the SSID of the WLAN setting list and confirm the setting is same as the access point which
your computer connects.
You can confirm the SSID set for your computer from the AirMac icon of the menu bar.
If the SSIDs of the machine and your computer are different, click Back to Top on the Check
Printer Settings screen to try to set up the network communication from the beginning. When you
try to set up, set the same SSID (access point) for the machine and your computer.
If the SSIDs of the machine and your computer are same, go to check 5.
Cannot Detect the Machine with the Wireless LAN: Check 5
Page top
To Next Page
Loading...
Need help?
General
Weight and Dimensions
