Adjusting Brightness
You can brighten or darken the colors of the overall image data during printing.
The following sample shows the case when light colors are darkened when the image data is printed.
No adjustment Darken light colors
The procedure for adjusting brightness is as follows:
You can also set brightness on the Quick Setup tab by choosing Color/Intensity Manual Adjustment
under Additional Features.
1.
Open the printer driver setup window
2.
Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3. Adjust brightness
Moving the Brightness slider to the right brightens (dilutes) the colors, and moving the slider to the left
darkens (intensifies) the colors.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. The
current settings are displayed in the settings preview on the left side of the printer driver.
416
To Next Page
Loading...
Need help?
General
