Canon Pro-1000 series User Manual

Changing the Print Options
You can change the detailed printer driver settings for print data that is sent from an application software.
Check this check box if part of the image data is cut off, the paper source during printing differs from the
driver settings, or printing fails.
The procedure for changing the print options is as follows:
1.
Open the printer driver setup window
2.
Click Print Options... on the Page Setup tab
The Print Options dialog box opens.
Note
•
When you use the XPS printer driver, the functions available to you are different.
3. Change the individual settings
If necessary, change the setting of each item, and then click OK.
The Page Setup tab is displayed again.
464

Canon Pro-1000 series Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	4800 x 2400 dpi
Display	3.0" LCD
Borderless Printing	Yes
Paper Sizes	A3, A3+, A4, 4 x 6", 5 x 7"
Connectivity	Ethernet