Canon pro-10s series User Manual

Changing the Settings in the Wired LAN Sheet
Note
• This screen is not available depending on the printer you are using.
• Enable the wired LAN setting of the printer to change the settings in the Wired LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in Printers:.
3.
Click the Configuration... button.
4.
Click the Wired LAN button.
5.
Change the settings or confirm.
Click OK after changing configuration. A screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted
Settings screen is displayed.
1.
TCP/IP Setting:
Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your
network environment.
Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.
Use following IP address
Select this option if no DHCP server functionality is available in your setup where you use the
printer, or you want to use a particular IP address or a fixed IP address.
205

Canon pro-10s series Specifications

General

Print Technology	Inkjet
Maximum Resolution	4800 x 2400 dpi
Ink Type	Pigment-based
Number of Ink Cartridges	10
Dimensions	689 x 385 x 215 mm
Weight	20 kg
Borderless Printing	Yes
Operating System Compatibility	Windows, macOS
Connectivity	USB, Ethernet, Wi-Fi
Supported Media Sizes	A3+, A3, A4, Letter, Legal
Direct Printing	Yes, via PictBridge
Ink Droplet Size	4 pl
Paper Weight	64 to 300 g/m²
Display	3.0-inch LCD