EasyManuals Logo

Canon pro-10s series User Manual

Canon pro-10s series
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #344 background imageLoading...
Page #344 background image
Forgot a Wireless Router Name, SSID, or a Network Key
Cannot Connect with a Wireless Router to Which a WEP or WPA/WPA2 Key Is Set (You Forgot the WEP
or WPA/WPA2 Key)
How to Set an Encryption Key
Cannot Connect with a Wireless Router to Which a WEP or WPA/
WPA2 Key Is Set (You Forgot the WEP or WPA/WPA2 Key)
For information on how to set up the wireless router, refer to the instruction manual provided with the
wireless router or contact its manufacturer. Make sure that the computer and the wireless router can
communicate with each other.
After that, set up the printer to match the settings of the wireless router using IJ Network Tool.
How to Set an Encryption Key
For information on how to set up the wireless router, refer to the instruction manual provided with the
wireless router or contact its manufacturer. Make sure that the computer and the wireless router can
communicate with each other.
After that, set up the printer to match the settings of the wireless router using IJ Network Tool.
When using WEP
The key length, key format, the key to use (one of 1 to 4), and the authentication method must match
among the wireless router, the printer, and the computer.
In order to communicate with a wireless router that uses automatically generated WEP keys, you
must configure the printer to use the key generated by the wireless router by entering it in
hexadecimal format.
Normally, select Auto for the authentication method. Otherwise, select Open System or Shared Key
according to the setting of the wireless router.
When the WEP Details screen appears after clicking Set on the Wireless Routers screen, follow the
on-screen instructions and set the key length, the key format, the key number, and the authentication
to enter a WEP key.
For details, see Changing the WEP Detailed Settings.
Note
When the printer is connected to an AirPort Base Station via a LAN:
When the printer is connected to an AirPort Base Station via a LAN, confirm the settings in
Wireless Security of AirPort Utility.
Select 64 bit if WEP 40 bit is selected for the key length in the AirPort Base Station.
344

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon pro-10s series and is the answer not in the manual?

Canon pro-10s series Specifications

General IconGeneral
Print TechnologyInkjet
Maximum Resolution4800 x 2400 dpi
Ink TypePigment-based
Number of Ink Cartridges10
Dimensions689 x 385 x 215 mm
Weight20 kg
Borderless PrintingYes
Operating System CompatibilityWindows, macOS
ConnectivityUSB, Ethernet, Wi-Fi
Supported Media SizesA3+, A3, A4, Letter, Legal
Direct PrintingYes, via PictBridge
Ink Droplet Size4 pl
Paper Weight64 to 300 g/m²
Display3.0-inch LCD

Related product manuals