Specifying Color Correction
You can specify the color correction method suited to the type of document to be printed.
Normally, when data is printed, the printer driver automatically adjusts the colors.
When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively or by
specifying a printing ICC profile from your application software, select ColorSync. When you want to print
by having the printer driver correct the colors, select Canon Color Matching.
The procedure for specifying color correction is as follows:
1.
Select Color Matching from the pop-up menu of the Print Dialog
2.
Select color correction
Select the item below that matches your purpose.
ColorSync
Perform color correction using ColorSync.
Canon Color Matching
Print in PRO mode.
For information about PRO mode, see "Adjusting Colors with the Printer Driver."
3. Complete the setup
Click Print.
When you execute print, the document data is printed with the specified color correction.
Important
• Depending on the application software, when a printing ICC profile is specified from that application
software, Canon Color Matching cannot be selected because ColorSync is selected automatically.
• The Quality & Media setting is necessary even when ColorSync or Canon Color Matching is
selected.
Related Topics
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Printing with ICC Profiles (Specifying an ICC Profile from the Application Software)
276
To Next Page
Loading...
Need help?
General
