The Message Is Displayed on the Computer Screen during Setup
The Enter Password Screen Is Displayed during Setup
The Screen for Setting the Encryption Is Displayed after Selecting the Wireless Router in the Wireless
Routers Screen
"You are connecting the printer to the non encrypted wireless network" Is Displayed
The Enter Password Screen Is Displayed during Setup
The following screen is displayed if an administrator password is set to the printer which has already been
set up to use via a network.
Enter the administrator password you have set.
Note
• An administrator password is already specified for the printer at the time of purchase.
For details:
About the Administrator Password
For improving security, we recommend to change the administrator password.
Changing the Settings in the Admin Password Sheet
The Screen for Setting the Encryption Is Displayed after Selecting the
Wireless Router in the Wireless Routers Screen
This screen is displayed automatically if the selected wireless router is encrypted. In this case, configure
the details to use the same encryption settings set to the wireless router.
For information on the encryption settings, see Changing the Settings in the Wireless LAN Sheet.
"You are connecting the printer to the non encrypted wireless
network" Is Displayed
351
To Next Page
Loading...
Need help?
General
