Quality & Media
This dialog allows you to create a basic print setup in accordance with the paper type. Unless special
printing is required, normal printing can be performed just by setting the items in this dialog.
Media Type
Select the type of media to be used.
You must select the type of media actually loaded in the printer. This selection enables the printer to
carry out printing properly for the material of the media used.
Paper Source
Select the source from which paper is supplied.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Rear Tray
Paper is fed from the rear tray.
Print Quality
Select the one that is closest to the original document type and the purpose.
When one of the radio buttons is selected, the appropriate quality will be set automatically.
High
Gives priority to print quality over printing speed.
Standard
Prints with average speed and quality.
Fast
Gives priority to printing speed over print quality.
Custom
Select this radio button to specify a quality.
Quality
When you select Custom in Print Quality, you can use the slider bar to adjust the print quality
level.
Black and White Photo Print
Set black and white photo printing. Black and white photo printing refers to the function of converting
your document to grayscale data in the printer to print it in monochrome.
299
To Next Page
Loading...
Need help?
General
