Canon ScanFront 300 - Chapter 3 ScanFront Setup

Chapter 3 ScanFront Setup
1. Before Setting Up the Scanner........................ 3-2
Installation Location ..............................................3-2
Connecting the AC Adapter ..................................3-3
Connecting the Network Cable .............................3-3
2. Turning the Power ON and OFF...................... 3-4
Turning the Power ON ..........................................3-4
Turning the Power OFF.........................................3-4
3. Configuring the Scanner Settings .................... 3-5
Administrator Settings ...........................................3-5
Web Menu (Administrator Mode) ..........................3-6
4. Configuring Administrator Settings .................. 3-8
Logging In to the Administrator Settings ...............3-8
Network Settings ...................................................3-9
Administrator Password ........................................3-9
Backup/Restore Setting Information ...................3-10
Select Login Type ...............................................3-10
Roller Counter Reset...........................................3-11
Format ScanFront ...............................................3-11
Touch Panel Adjustment.....................................3-11
Display Language Setting ...................................3-12
Network Test.......................................................3-12
Switch to Web Application Mode
(from Standard Mode of ScanFront 330 Only) ....3-12