Replace the Heat Exchanger Foils
Before you begin
NOTE
This POC action is available, depending on the type of the heat exchanger foils.
1. On the control panel, touch [System] -> [Maintenance] -> [Go to maintenance tasks] ->
[Replace the heat exchanger foils] -> [Start].
2. [Enter the maintenance PIN.]
3. [Touch Next to unlock the door.]
Required tools
Socket wrench
New heat exchanger foils
CAUTION
Only trained personnel is allowed to carry out POC actions.
Illustration
[78] Required tools
Procedure
Replace the heat exchanger foils
Step Action Illustration
1 [Open the front door.]
4
Replace the Heat Exchanger Foils
Chapter 14 - Maintain the print system
381
Canon varioPRINT DP line
To Next Page
Loading...
