Field name Specification Description
<jobid> A number The PRISMAsync controller creates a unique job
identification number when:
• A new print job is received
• A new copy or scan job is started
• An existing job is started from the mailbox
• An existing job is moved from the [Printed jobs]
section to the [Waiting jobs] section
NOTE
The term mailbox is understood to in-
clude the list of [Waiting jobs] and the
[DocBox].
<jobtype> Possible entries:
• COPY
• IP
• AP
• SYSTEM
• SCAN
• SCAN2MBX
• MBXCOPY
Describes the type of job.
• COPY: Direct copy job
• IP: Interactive print job (a job that was printed
from the mailbox).
• AP: Automatic print job (a job that was directly
printed from the network, not from the mailbox)
• SYSTEM: A test print that was started in the serv-
ice mode or service copy mode.
• SCAN: A scan-to-file job.
• SCAN2MBX: A job that was scanned to the mail-
box.
• MBXCOPY: A copy job that was printed from the
mailbox.
NOTE
The term mailbox is understood to in-
clude the list of [Waiting jobs] and the
[DocBox].
<startdate> <yyyy>-<mm>-<dd>
NOTE
When you
open the file
in Microsoft®
Excel, the date
format
changes into
the date for-
mat that is de-
fined in Micro-
soft® Excel
The date on which the printer started printing the
job. Typically, this is the first moment that a job can
be interrupted or stopped via the control panel.
4
The Account Log File
Chapter 5 - Prepare the print system
77
Canon varioPRINT DP line
To Next Page
Loading...
