168
R006 Stopping multicast [info]
R101 RTP session timeout [notice]
R102 Information acquisition failure (RTP payload
size) [notice]
R102 Information acquisition failure (IP address)
[notice]
R103 RTSP authentication failure [notice]
R107 RTSP authentication failure or missing
authentication information [notice]
R107 Insufficient resources [notice]
R301 Distribution communication error [err]
R302 Parameter acquisition failure [err]
R303 Metadata distribution initialization failure [err]
R304 Abnormal termination of client [err]
R304 Client disconnected [err]
Description stop multicast: profile=%1,
num_of_sessions=%2(V=%3,A=%4,
M=%5,BC=%6) (R006)
%1 Client IP address
%2 Profile name of requested
MulticastStreaming STOP
%3 Total distribution count of Video stream
%4 Total distribution count of Audio stream
%5 Total distribution count of Metadata stream
%6 Total distribution count of
AudioBackChannel
Meaning Multicast was stopped.
Description session timeout: session ID=%1 (R101)
%1 Session ID
Meaning RTP session has timed out.
Description cannot get parameter: RTP_payload_size
(R102)
Meaning Information acquisition has failed (RTP
payload size).
Description cannot get parameter: IP_address (R102)
Meaning Information acquisition has failed (IP
address).
Description RTSP authorization error (R103)
Meaning RTSP authentication has failed.
Description RTSP Error: error_code=401: Unauthorized
(R107)
Meaning RTSP authentication has failed or
authentication information is missing.
Description RTSP Error: error_code=503: Service
Unavailable (R107)
Meaning Service unavailable due to insufficient
resources.
For example, the max. number of RTP
connections exceeded.
Description message queue open error: %1 (R301)
%1 Modules that generate errors
RTP_CTRL_QUEUE
RTP_DATA_QUEUE
VIDEO_CTRL_QUEUE
VIDEO_DATA_QUEUE
AUDIO_CTRL_QUEUE
AUDIO_DATA_QUEUE
EVENT_CTRL_QUEUE
RECVQ_META
SENDQ_MEDIA
Meaning A communication error occurred between
modules.
Countermeasure
If the problem persists after repeated
attempts and rebooting, the camera may be
faulty. Arrange for servicing.
Description cannot get parameter: %1 (R302)
%1 user_account: User account
IP_address: IP address of the camera
profile_media_configuration:
MediaConfiguration information
RTSP_port_number: RTSP port number
Meaning Parameter acquisition has failed.
Description metadata initialization error (R303)
Meaning Metadata distribution initialization has failed.
Description delete session from some kind of error:
client_IP=%1, session_ID=%2 (R304)
%1 Client IP address
%2 Session ID
Meaning The client session terminated abnormally.
Description connection reset by peer: client_IP=%1
(R304)
%1 Client IP address
Meaning Disconnected from client.
To Next Page
