Video
93
Onscreen Displays and Data Code
You can turn most onscreen displays on or off.
Repeatedly press h to turn the onscreen displays on/off in the
following sequence:
, mode:
•All displays on
• Most displays off
1
1
Pressing h will turn off most of the icons and displays that appear automati-
cally but will not remove onscreen displays that were turned on manually (for
example, onscreen markers or the audio level meter).
2
Touch the screen to display the playback controls.
Operating modes:
mode
2
:
•All displays on
• Only data code on
•All displays off
mode
2
:
•All displays on
• Only recording date
and time on
•All displays off
About the Data Code
With every scene or photo recorded, the camcorder keeps a data code
(date/time of recording, information about the camera setup, etc.). In
mode, this information is displayed within the Exif information
panel while the playback controls are displayed on the screen; in
mode, you can select the information to be displayed with the y
8 [Data Code] setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
