Canon w-e1 - Page 65

65
Reconnecting
4
Operate the connected device.
q Smartphone
 Activate the smartphone’s Wi-Fi function, then start Camera
Connect.
 If the smartphone’s connection destination has been changed,
restore the setting to connect to the camera or the same access
point as the camera.
D EOS Utility
 Start EOS Utility on the computer.
 If the computer’s connection destination has been changed,
restore the setting to connect to the camera or the same access
point as the camera.
 If you do not know the SSID of the destination when reconnecting, select
[Review/change settings] 9 [Confirm set.] on the screen for step 3 to
check it (p.69).
 When connecting by selecting [Easy connection], “_Canon0A” is
displayed at the end of the SSID.