Canon w-e1 - Page 69

69
Checking, Changing, or Deleting Connection Settings
4
Check or change the settings.
 Select an item and press <0>, then
check or change the settings on the
displayed screen.
[Change set.]
Change the settings. When [Change set.] is selected, a screen for
connection settings configuration appears. Configure connection
settings again following the procedures displayed.
[Change settings name]
Change the name of the settings. Select [Change settings name], then
enter the name of the settings using the virtual keyboard (p.15).
[Viewable imgs] (p.56)
Displayed when [q] (Connect to smartphone) is selected. Settings will
appear at the bottom of the screen.
[Confirm set.]
Check the settings. When you select [Confirm set.], the settings will be
displayed.