Canon XA40 - Page 95

Video Output Configuration
95
Video Output Configuration (Playback)
1
> [£ Display Setup] > [SDI/HDMI Scan Mode] (s) or [HDMI Scan Mode] (t)
setting.
2
For HDMI output: > [£ Display Setup] > [HDMI Max Resolution] setting.
s For SDI output: > [£ Display Setup] > [SDI Output] setting.
3
s Only HDMI output is available for this video configuration.
4
s only.
5
YCbCr 4:2:0 video recorded on the card is output as a YCbCr 4:2:2 signal.
Video configuration
of the clip
Scan mode
setting
1
Maximum
resolution
setting
2
Video output configuration
Resolution Frame rate Resolution Frame rate Color sampling
3840x2160
29.97P
23.98P
P
3840x2160 3840x2160
3
Same as that for
video
configuration
3
YCbCr 4:2:2
8 bit
5
1920x1080 1920x1080
3
Same as that for
video
configuration
3
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080
SDI output
4
:
29.97PsF
(59.94i)
HDMI output:
59.94i
1920x1080
59.94P
29.97P
23.98P
P
3840x2160 1920x1080
3
Same as that for
video
configuration
1920x1080 1920x1080
3
Same as that for
video
configuration
1280x720
(59.94P)
1280x720 59.94P
PsF — 1920x1080
SDI output
4
:
29.97PsF
(59.94i)
HDMI output:
59.94i
1280x720 59.94P — — 1280x720 59.94P