How to fix radio reception interference on Canton musicbox M Speakers?
To improve radio reception, try repositioning the antenna. Ensure the cable antenna is tensioned and placed as freely as possible, away from metal surfaces. If you are in a difficult geographic location, consider using a roof antenna or broadband cable connection. You may also need to manually align the transmitter.
What to do if Canton Speakers musicbox M does not activate?
First, ensure the mains cable is securely connected to both the socket and the musicbox M. If it's connected, check that the main switch is switched to the “ON” position.
Why does my Canton Speakers musicbox M hum?
Humming can occur due to several reasons. The signal lines from the source device to the musicbox M might be too long; try using shorter lines. The signal line may not be shielded, or the shield is interrupted; replace it with a shielded line. An earthing loop (ground loop) may be generated; connect all devices to the musicbox M with a protective contact plug to the socket strip. A consumer without interference suppression (e.g., fridge) at the mains may be the cause. For testing, switch off possible interference sources; if the hum vanishes, have interference suppression applied to the respective device or connect the interference source to another mains phase. You may also switch a special “jacket current filter” between the source device and musicbox M or turn the mains plug.
What to do if there is no sound playback on Canton Speakers musicbox M?
If there is no sound, ensure the correct sound format is selected on your source device, as “DTS” or “Dolby Digital” coded output formats cannot be played back. Also, verify that the digital output at the source device is enabled. Check the cable connection between the source device and the musicbox M, replacing it if necessary. Ensure the correct input is selected on the musicbox M, and that the device is not muted by pushing the mute button until the volume value is displayed.
Why is there no playback via Bluetooth on Canton musicbox M?
If there is no Bluetooth playback, ensure there is a connection between the musicbox M and your mobile device, and connect your mobile device. If the mobile device is connected but playback is not occurring, try reconnecting it. Other possible reasons: you are out of range; set the volume at the mobile end device to the maximum possible value; ensure that interference sources like a WLAN router or laptop are not set up in direct proximity of the musicbox M; concurrent operation of WLAN and Bluetooth from a mobile end device is not possible without interferences in most cases.
What to do if Canton musicbox M Speakers musikbox M sounds “sharp”/ “aggressive” (too much treble)?
If the musikbox M sounds “sharp” or “aggressive” with too much treble, it could be because the acoustic space is acoustically “hard” (little dampened). Adjust the treble in the menu “Treble”.
What to do if Canton Speakers musikbox M sounds “dull” (not enough treble)?
If the musikbox M sounds “dull”, and lacks treble, it could be due to the acoustic space being strongly dampened or the treble sound control being lowered. Try lifting the treble in the menu “Treble”.
What to do if Canton Speakers musikbox M has too much bass?
If your musikbox M has too much bass, check the bass level in the menu “Sound control” and ensure it is not set to a value of > 0 dB. If you are listening with high volume and have “Bass expand” activated, set “Bass expand” to “Off”. If using an external subwoofer, ensure it is correctly set with less level. Finally, consider repositioning the system, possibly farther away from the wall.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Battery Life | Up to 10 hours |
| Principle | 2-way bass reflex |
| Connectivity | Bluetooth, AUX-In |
| Color | Black, White |
Visual guidance on safe handling, placement, and operation.
Detailed instructions and precautions for safe device operation.
Specific guidance on safe handling of power cords and connections.
How to connect analogue and digital audio sources.
Steps for connecting and playing audio via Bluetooth.
Instructions for connecting and playing Apple devices.
How to connect antenna, tune, and save radio stations.
Solutions for frequent operational problems and errors.
To Next Page
