EasyManua.ls Logo

CanyCom CM141 - Operation; Preparation; Pre-start up Inspection

CanyCom CM141
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-13-
Operation 4
• Keep re and spark away when handling fuel.
Always stop engine before refueling.
Do not ll beyond the limit (bottom of the ller lter) so that fuel will not
overow. In case fuel is spilt, wipe out immediately.
Pre-start up Inspection
Preparation
Always perform an inspection before use.
Refer to the Maintenance Schedule (page 31) for the inspection schedule and procedure.
Checking and Filling Fuel
1. Check fuel gauge. If fuel level is low, ll fuel.
2. Open fuel ller cap and ll fuel.
3. Put fuel ller cap back in place and close it
securely.
5331M-0401-010E
Fuel Gauge
Fuel Filler Cap
• Fuel : Automotive Unleaded Gasoline
• Fuel Tank Capacity : 7.0L
NOTE
Always perform a pre-startup inspection. If machine needs repair, service it
before use.
Fire hazard: clean machine of cut grass and similar materials. Cut grass that is
accumulated on the machine can catch re.

Related product manuals