CanyCom CM141 - Drive Train; Tires

Maintenance
-42-
5
Drive Train
• Stop engine and remove ignition key before servicing drive train.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.
Tires
1. Park machine on a level ground.
2. Remove valve cap.
3. Check tire air pressure. If different from the
specied values, adjust pressure.
4. Put valve cap back in place.
5319M-0508-010E
Valve Cap
• Inate tires to the specied pressure. Under- or over-ination causes uneven
wear or other damages to tires.
Tire Size Pressure KPa(kgf/cm
2
)
Front Wheel AGR 3.50-7 (2PR) 110 (1.1)
Rear Wheel 16×7.00-8 (2PR) 130 (1.3)
• Dispose of drained oil properly.