After Normal Use
1. Clean machine; wash off dirt, mud, and remove grass and other foreign materials after
use.
2. If machine is to be left outside, cover machine with protective, water-proof covering after
it is cooled off.
• Do not wash engine or control panel with running water; water may enter inside
and cause rust or damage.
• Fire hazard; clean machine of cut grass and similar material after use. Cut grass
that is accumulated on the machine can catch re.
• Do not set cutting height too low. It may hit ground
• Work on level ground without any stones.
• Use hose with 15mm or 18mm of inner diameter.
NOTE
To Next Page
Loading...
