Removing and Installing Body Panels
• Cut or pinch hazard exists when removing or installing body panels; beware of
sharp edges and pinch points.
• Make certain to reinstall panels after removing for repairs or inspection.
Front Cover
5332M-0401-040E
Latch
Front Cover
1. Pull top side of front cover to unlock latch.
2. Pull up front cover.
• Tool box is provided under the front cover.
Use this tool box to store tools or substitute
cutting blades.
NOTE
5332M-0401-140E
Front Cover
Clip
Rod
3. Raise steering wheel to the maximum angle
and t clip on the back of front cover to rods.
4. Fit upper part of front cover.
• Beware not to catch front cover by the
plates on both sides when you installing
front cover.
NOTE
To Next Page
Loading...
