1. Park machine on a level ground.
2. Have an appropriate oil drain pan.
3. Remove drain plug on the left front knuckle
to drain oil.
4. Remove drain plug on the right front knucle
to drain oil as well.
• Drain plug for the right front knucle is on
back side of the front axle.
NOTE
5. Install both drain plugs back in place.
6. Remove right front step.
7. Remove oil ller cap.
8. Fill specied amount of oil into ller.
9. Install ller plug back in place.
10. Install right front step.
To Next Page
Loading...
