1. Pull slide lever to the right to slide seat
forward or backward.
2. When seat is in a desired position, release
slide lever and lock seat securely.
Sliding seat
5332M-0401-050E
Slide Lever
Seat
• Beware of pinch points when adjusting seating position.
• After adjusting seat, try moving seat back and forth and up and down to make
sure it is securely locked in its position.
Adjusting Seating Position
5332M-0401-060E
Seat Suspension
Stiffness Adjust Lever
Adjusting Stiffness
1. Move seat suspension stiffness adjust lever
to adjust desired seat stiffness.
5332M-0401-071E
Reclining Adjust Knob
Adjusting Reclining Angle
1. Rotate reclining adjust knob on the right of
seat to adjust reclining angle of the seat.
• Do not ajust seat posision to the end and
recline the seat. The seat may contact with
rear cover. This may activate seat switch
and stop engine. Adjust seat in the range of
not contacting with rear cover.
NOTE
To Next Page
Loading...
