9. Move the throttle lever to [ (slow)] position.
10. Push the choke knob to the original position.
11. Allow the engine to warm up by running
it for 3-5 minutes without any load. (It is
not necessary when the engine is already
warm.)
3. Move the clutch lever to [ (disengaged)]
position.
4.
Follow 4 to 10 in the normal starting
procedure above.
Starting in Cold Weather
• Drive the machine gently in the rst week or
so, (40-50 hours) of use after purchase for
breaking-in.
NOTE
5.
Move the clutch lever to [ (engaged)]
position.
6. Allow the engine to warm up by running it for
3-5 minutes without any load.
To Next Page
Loading...
