CanyCom SC75 - Page 38

-29-
Maintenance 5
Item Description
Schedule
Note
PSI
Mon
Year
Engine
General
V a l v e
Clearance
Valve clearance shall be correct.
* this may be skipped if there is no noise due
to incorrect valve clearance, and engine
runs normally.
√
Contact your Canycom
r e p r e s e n t a t i v e f o r
inspection.
Compression
Compression shall be normal
* this may be skipped if running and exhaust
condition is normal at idle and under
acceleration.
√
Contact your Canycom
r e p r e s e n t a t i v e f o r
inspection.
E n g i n e
Mount
Engine base shall be free of cracks or
deformation.
√ √ √
Mounting bolts and nuts shall not be loose or
missing.
√ √ √
L u b r i c a t i o n
System
Oil shall be clean and at correct level.
√ √ √
Inspecting/Changing:
Page 37
No noticable oil leak shall be found in head
cover, oil pan, or pipes.
√ √ √
Fuel System
There shall not be any leak in fuel tank,
hoses, or pipes.
√ √ √
Fuel hoses shall be free of damage or
deterioration.
√ √ √
Fuel lter shall not be excessively dirty or
clogged.
√ √
There shall not be sediments or water in the
fuel tank.
√ √
Electrical System
S p a r k
Plugs
Electrodes shall not be worn, and there shall
not be excessive carbon deposit.
√
Cleaning/Replacing:
Page 40
C h a r g e
System
Battery shall be charged.
√
Contact your Canycom
r e p r e s e n t a t i v e f o r
inspection.
Battery
Battery electrolyte level shall be correct.
√ √
I n s p e c t i n g / F i l l i n g :
Page 53
Terminals shall be free of marked corrosion
and are tightly secured.
√ √
Wiring
Connections shall be securely connected.
√ √
Wiring shall be free of damages.
√ √
Drivetrain
Clutch
Clutch shall not make noise and shall
disengage completely when operated at idle.
√ √
Clutch shall not slip and engage smoothly.
√ √