CanyCom SC75 - Page 39

Maintenance
-30-
5
Item Description
Schedule
Note
PSI
Mon
Year
Drive Train
Drive Belts
Belt tension shall be properly adjusted.
√ √
Inspecting/Adjusting:
Page 46
Belt shall be free of damages, excessive
wear, or dirt; shall be free of oil or grease.
√ √
Transmission
Irregular noise or overheating shall not be
observed.
√ √ √
Oil shall be clean and lled to a proper level.
√ √
Replacing: Page 44
There shall not be oil leak in or around
transmission.
√ √
HST Pump
Drive the machine forward and backward,
turn left and right in both directions; machine
shall move normally and free of irregular
noise or overheating.
√ √ √
Hydraulic uid shall be lled to a proper
level.
√ √
Inspecting/Changing:
Page 42
Hydraulic uid shall be clean and free of dirt
or contamination.
√ √
Inspecting/Changing:
Page 42
There shall be no uid leak in or around uid
tank.
√ √
Linkage
Rods, links, and wires in linkage shall be free
of deformation or damage.
√ √
Connections shall be free of looseness,
excessive play, or missing cotter pins.
√ √
Undercarriage
W h e e l s
S p r o c k e t s
Idlers
Shall be free of cracks, defromation, or
excessive wear.
√ √ √
There shall not be excessive play in axle.
Irregular noise or overheating shall not be
observed when traveling.
√ √ √
Mounting bolt or nut shall not be loose or
missing.
√ √ √
There shall be no oil leak in or around axle.
√ √
Tracks
There shall not be marked cut, deterioration,
or wear.
√ √ √
Track shall be properly tensioned; shall not
be too loose or too tight.
√ √ √
Adjusting: Page 41
Tension bolt shall be free of deformation or
corrosion.
√ √ √