CanyCom SC75 - Page 40

-31-
Maintenance 5
Item Description
Schedule
Note
PSI
Mon
Year
Brake System
Parking Brake
Parking brake shall work properly.
√ √ √
Adjusting: Page 47
Parking brake shall be able to hold the
machine on a 20-degree slope.
√ √
Linkage
Rods, links, and wires in linkage shall be free
of deformation or damage.
√ √
Connections shall be free of looseness,
excessive play, or missing cotter pins.
√ √
Hydraulic System
H y d r a u l i c
Pump
There shall be no leak in or around hydraulic
pump.
√ √
Fastening bolts and nuts shall not be loose
or missing.
√ √
No irregular vibration, noise, or heat shall
be observed when hydraulic pump is in
operation.
√ √
Amount and pressure of discharge under
load shall be within the standard range
specied by the manufacturer.
*this may be skipped if irregular vibration,
noise, or heat described above is not
observed.
√
H y d r a u l i c
Valve
There shall be no leak in or around hydraulic
valve.
√ √
H y d r a u l i c s
Belt
Belt tension shall be properly adjusted.
√ √
Inspecting/Adjusting:
Page 52
Belt shall be free of damages, excessive
wear, or dirt; shall be free of oil or grease.
√ √
Plumbing
Plumbing shall be free of cracks, damages,
twists, or deterioration.
√ √
There shall be no leak in pipes, hoses, joints,
or seals.
√ √
Plumbing shall be mounted properly, and
fastening bolts and nuts shall not be loose or
missing.
√ √
Breather shall not be clogged.
√ √