10
Starting-up
Start / switch off the hob:
Action Control panel Display
To start press key [ ] [ 0 ]
To stop press key [ ] nothing or [ H ]
Start / switch off a heating zone:
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light
on
To set slide on the “slider” [ 0 ] to [ 9 ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on “slider” [ 0 ] or [ H ]
If no action is made within 20 second the electronics will return to standby mode.
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display will show
[ U ]. The symbol [ U ] disappears when the pan is put back on the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t wait for the pan detection [ U ] to activate.
Residual heat indication
After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot and this is indicated by a [ H ] on the display.
The symbol [ H ] disappears when the heating zones can be touched without danger.
As far as the residual heat indicators are illuminated, don’t touch the heating zones and don’t put
any heat sensitive objects on them. There is a risk of burning and fire.
To Next Page
Loading...
