12
Egg timer function :
Example for 29 minutes :
Action Control panel Display
Activate the hob press display [ ] zone control lights are on
Select« Timer » press display [ CL ] [ 00 ]
Set the units slide on the “slider “ to [ 9 ] [ 0 fixed ] [ 9 flashing]
Validate the units press display [ 09 ] [ 0 flashing] [ 9 fixed ]
Set the tens slide on the “slider “ to [ 2 ] [ 2 flashing] [ 9 fixed ]
Validate the tens press display [ 29 ] [ 29 ]
After a few seconds the control light stops flashing.
As soon as the selected cooking time is finished the timer displays a flashing [ 00 ] and a alarm rings.
To stop the sound and the flashing press the display [ 00 ]. The hob now switches off.
Automatic cooking/automatic warm up
All the cooking zones are equipped with an automatic preheat cooking device. The cooking zone
starts at full power for a certain time, then automatically reduces its power to the pre-selected
level.
Start :
Action Control panel Display
Zone selection press display [ 0 ] selected [ 0 ] and control light on
Full power setting slide on the “slider “ to [ 9 ] pass from [ 0 ] to [ 9 ]
Automatic cooking re-press on display “slider “ [ 9 ] [ 9 ] is flashing with [ A ]
Power level selection slide on the “slider “ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is flashing with [ A ]
Switching off the automatic cooking :
Action
Control panel Display
Zone selection press [ 7 ] from the zone [ 7 ] flashing
with [ A ]
Power level selection slide on the “slider “ [ 1 ] to [ 9 ]
Pause function
If you need to leave the kitchen, maybe to take a phone call this function stops all the hob’s
cooking activity and allows you to restart with the exact same settings.
Start/stop the pause function :
Action Control panel Display
Engage pause press [ ] key and hold for 2s displays [ II ] in the
heating zone displays
Exit the pause function press [ ] key and hold for 2s pause indicator light is
flashing
press another touch or pause indicator light is off
slide on the “slider “
To Next Page
Loading...
