Need help?Do you have a question about the Carel Clima and is the answer not in the manual?
General| Protection Rating | IP20 |
|---|---|
| Relative Humidity | 10% to 90% non-condensing |
| Output Type | Relay |
| Display | LCD |
| Control Type | PID, ON/OFF |
| Communication | RS-485 Modbus RTU |
| Storage Temperature | -20...+70 °C |
Lists available hardware models and their corresponding operating modes.
Details the physical process of opening and assembling the instrument.
Provides physical dimensions and installation template information.
Explains wiring diagrams and connections for various device models.
Shows the device display layout and identifies key symbols.
Explains the function of each button on the thermostat/humidistat.
Describes how to set the operating mode using dipswitches and model codes.
Outlines essential parameters like set points and time bands for initial setup.
Details extra features like manual night/day mode changes and timer settings.
Explains basic temperature control using one relay and optional analogue output.
Describes two-stage temperature control using two relays and optional analogue output.
Details humidity control capabilities, including proportional control.
Covers combined temperature and humidity control with one-stage operation.
Explains two-stage temperature and humidity control with analogue output.
Describes automatic cooling/heating control with three types of operation.
Covers automatic control with both temperature and humidity.
Details ON/OFF control for radiant floor systems, including temperature and humidity.
Explains proportional control for radiant floor systems using specific model features.
Lists and describes the parameters for the standard version of the controller.
Details additional parameters specific to T+H proportional control for radiant systems.
Lists various alarms, their causes, reset methods, and effects on the system.
Provides detailed technical data including operating conditions and electrical properties.
Outlines wiring requirements and specifications for different inputs and outputs.
Lists supervisor parameters for CAREL and Modbus® communication protocols.
Summarizes changes and improvements made in various software releases.
To Next Page
