different parameter visibility depending on the rights associated with each profile (User, Service,
Manufacturer).
Procedure:
1. download the “Applica” app for Android devices from Google Play;
2. (on the mobile device) start the app for commissioning the controller;
3. activate NFC;
4. move the device closer to the controller, less than 10 mm away;
5. follow the instructions shown on the display.
3.2.5 Direct functions
The following functions can be activated directly from the keypad or via the app:
Icon Display On/Off
Lht Cabinet light
+
Cnt Continuous cycle
dEF Defrost
+
CLn Clean cabinet
ON Unit ON
+
rH Anti-sweat heater
Procedure:
1. go to the standard display;
2. press PRG: Lht is displayed;
3. press PRG to turn the light on/off and DOWN to move to the next direct function;
4. follow the previous steps for all the other functions;
5. When finished, press Esc to exit.
1. Go to the standard display;
2. Press PRG: Lht is displayed, the UP
and DOWN buttons light up.
Press PRG to turn the light on/off: the
icon will come on or go off.
Press DOWN to activate the next
function (Cnt) or press Esc to exit;
3. Press PRG to activate the
continuous cycle (Cnt).
Press DOWN to activate the
next function;
4. Follow the previous steps for all
the other functions;
5. Select Esc to exit;
6. The standard display is
shown
30|3. User interface
MPXone +0300086EN rel. 1.0– 04.09.2018
To Next Page
Loading...