EasyManua.ls Logo

Carel MPXone series - Page 89

Carel MPXone series
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Code Description Def Min Max UOM User
User
terminal
dS2 Compressor operating time in sequential stop defrost mode 120 0 240 min M NO
ddt Additional end defrost temperature delta in power defrost mode 0 -20 20 °C/°F S NO
ddP Additional maximum defrost time delta in power defrost mode 0 0 60 min S NO
dn Nominal skip defrost duration 75 0 100 % S NO
r3
End defrost signal by timeout
0/1 = disabled/enabled
0 0 1 - S NO
c7
Defrost priority over continuous cycle
0/1 = No/Yes
0 0 1 - M NO
Defrost scheduling
td1..8-d
Defrost 1 to 8 - day
0 = event disabled
1 to 7 = Monday to Sunday
8 = from Monday to Friday
9 = from Monday to Saturday
10 = Saturday & Sunday
11 = every day
0 0 11 day S NO
td1..8- h Defrost 1 to 8 - hours 0 0 23 hours S NO
td1..8-n Defrost 1 to 8 - minutes 0 0 59 minutes S NO
td1..8-P
Defrost 1 to 8 - enable power defrost:
0/1 = normal/power defrost
0 0 1 - S NO
d1S
Number of daily defrosts (td1)
0 = Disabled 5 = 4 ore 48 minutes 10 = 2 hours and 24 minutes
1 = 24 ore 0 minutes 6 = 4 ore 0 minutes 11 = 2 hours and 11 minutes
2 = 12 ore 0 minutes 7 = 3 ore 26 minutes 12 = 2 hours and 0 minutes
3 = 8 ore 0 minutes 8 = 3 hours and 0 minutes 13 = 1 hour and 0 minutes
4 = 6 ore 0 minutes 9 = 2 hours and 40 minutes 14 = 30 minutes
0 0 14 - S NO
d2S Number of daily defrosts (td2) - see d1S 0 0 14 - S NO
Evaporator fans
F0
Evaporator fan management
0 = always on
1 = activation based on Sa - Sb (see FSa and FSb)
2 = activation based on Sa
(Sa = first probe, Sb = second probe)
0 0 2 - S YES
F1 Evaporator fan activation threshold (only if F0 = 1 or 2) -5 -50 50 °C/°F S YES
F2
Evaporator fans with compressor off
0 = see F0
1 = always off
1 0 1 - S NO
F3
Evaporator fans during defrost
0/1 = on/off
1 0 1 - S NO
Fd Post-dripping time after defrost (fans off with control active) 1 0 15 min S NO
Frd Fan activation differential (including variable speed) 2 0.1 20 °C/°F S YES
F5 Evap. fan cut-off temperature (hyst. 1°C) 50 F1 50 °C/°F S NO
F6 Max evaporator fan speed 100 F7 100 % M NO
F7 Min evaporator fan speed 0 0 F6 % M NO
F8
Evaporator fan peak time
0 = Function disabled
0 0 240 s M NO
F10
Evaporator fan forcing time at max speed
0 = Function disabled
0 0 240 min M NO
FSa
First fan control probe
0: Not configured
1: Air off (Sm)
2: Defrost (Sd)
3: Air on (Sr)
4: Superheated gas (tGS)
5: Saturated evaporation pressure (PEu)
3 0 13 - M NO
ENG
MPXone +0300086EN rel. 1.0 04.09.2018
6. Parameter table|89

Related product manuals