9
ENG
“UEX-PLUS” +0300040EN - rel. 1.4 - 25.09.2015
installeruserservice
4. turn the red oval-shaped plate with the CAREL logo until covering the
fastening holes.
Models UE025 to UE130
1
2
Fig. 1.l
1. slip the cover/covers onto the frame (keeping it/them slightly raised and
tilted), until it rests on the rear edges;
2. tighten the screws on the top of the humidifi er using a screwdriver.
Important: in models UE025 to UE130 open the electrical
compartment on the humidifi er using the lock with slot.
Fig. 1.m
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidifi er, make sure the following are included:
okit of screws with plugs for
wall-mounting;
okit code 98C565P009 of
connectors for the electronic
board
omodels UE025 to UE130 only:
angular plastic hose (drain
water connection).
omodels UE025 to UE130 only:
code FWHDCV0000 non-
return valve with connection
pipe
To Next Page
Loading...
Need help?
General
