Carlson Boretrak2 User Manual

BT2 user manual - H-5911-9004-02-B Page | 60
In your device, tap Settings > Bluetooth. Ensure the Bluetooth function is turned ON.
The Boretrak2 probe is identified over Bluetooth by its serial number. To operate in conjunction with the PDA, the
probe must be listed as a Paired device (Figure 68).
All Bluetooth devices which the device can see, but which are not paired, are listed as Available devices.
Identify the correct entry in the list of available devices. Tap the serial number to pair the device with the probe.
A Bluetooth pairing request appears (Figure 69). Tap OK.
A pairing code is required but this will be pre-entered by default. Tap Pair. The device pairs with the Boretrak2
probe. When successful, the Boretrak2 probe is listed under Paired devices.
If the Boretrak2 probe is not listed under paired devices or under available devices, check that:
• The Bluetooth function is ON.
Figure 68 The Boretrak2 in the list of available devices
Figure 69 Boretrak2 pairing request (left); Boretrak2 a paired device (right)

Carlson Boretrak2 Specifications

General

Brand	Carlson
Model	Boretrak2
Category	Measuring Instruments
Language	English