SP4012 TRANSPORTING
21
DO NOT TOW! THE MODEL SP4012 IS DESIGNED TO BE TRANSPORTED TO
THE JOB SITE AND WILL MOVE UNDER ITS OWN POWER ONCE ON SITE.
Transport machine in a suitable vehicle
designed for a load of these dimensions and
weight. A low trailer is recommended due
to its decreased entry height, and will be
safer all around.
The model SP4012 can be loaded into a pick-up truck, but requires
increased safety precautions against tipping. Tie-downs, a sturdy and
stable loading ramp and extra caution are required.
• THE TRAILER MUST BE SECURELY ATTACHED TO THE TOW
VEHICLE BEFORE LOADING OR UNLOADING THE STUMP
GRINDER.
• LOADING RAMPS MUST BE STURDY AND SECURELY ATTACHED
TO THE TRAILER BEFORE ATTEMPTING TO LOAD OR UNLOAD
THE MACHINE.
• Check trailer for security and
make sure chains are properly
installed.
• Check tires inflation.
• Check trailer lights for proper
operation.
• Never transport the machine
with the engine running.
• Towing will affect handling.
Allow for extra stopping
distances.
• Start and stop gradually.
• Tow at a safe reasonable speed.
To Next Page
Loading...