12 EN
06. FIRST START
1. Remove any protective films, stickers and any
other packing material on the appliance. Make
sure that the accessories of the appliance fit
the description, and that the appliance is not
damaged.
2. Choose a safe, firm and stable surface with an
easily reachable power supply and make sure
there is some free space around the appliance:
at least 150 mm on the sides and at least 350
mm above the appliance.
3. Install the external drip tray (1). Make sure it is
installed properly.
4. Fill the water tank with water (13) (see “Filling
the water tank”).
5. Fill the bean box (11) with coffee beans (see
“Filling the coffee bean container”).
6. Unwind and straighten the power cord and
insert the plug into the socket located on the
back of the appliance. Insert the other end of
the power cord into a wall socket with suitable
power voltage. Clean the appliance by pressing
the hot water button . The appliance is ready
to use.
To Next Page
Loading...
