18 EN
SELECTING MODES
The appliance has three different settings: default setting, ECO
mode and speed mode. In ECO mode, the appliance helps to
save more energy.
In speed mode, the user can make their coffee faster than in
default setting.
Speed
Mode
Default
Setting
ECO Mode
Illumination yes yes no
Pre-brewing* no yes yes
Auto shut-off time 30 min. 20 min. 10 min.
Cup volume memory yes yes yes
*The pre-brewing moistens the grounded beans in the brewer with
a small amount of water. It expands the coffee grounds to build up
a greater pressure in the brewer helping to extract oils and flavors
from the grounded beans.
1. When the appliance is in the standby mode, press and holds
for 5 seconds.
2. The buttons will have the following indications in different
settings:
Hot water
button
Espresso
button
Lungo
button
ECO Mode Lights ON Flashing Flashing
Speed Mode Flashing Lights ON Flashing
Default Setting Flashing Flashing Lights ON
3. Press the Hot Water button
for ECO mode, Espresso button
for speed mode and Lungo button for default settings.
Two beeps will sound meaning that the new mode is applied.
4. If you want to keep the settings unchanged, press again or
wait for 5 seconds for the appliance to return to the standby
mode.
To Next Page
Loading...
