20 EN
8. When the descaling is completed, the appliance will switch off
automatically.
CAUTION!
The descaling agent contains acids that can hurt skin
and eyes. Strictly follow the manufacturer’s safety
instructions on the packaging of the descaler.
Using unsuitable cleaning agents and irregular descaling
may cause malfunctions that are not covered by the
warranty.
To ensure the descaling process is carried out properly,
be patient during the process and wait until the
appliance switches off automatically.
EMPTY SYSTEM FUNCTION
The empty system function is recommended to use before long
period of non-use, for frost protection and before talking the
appliance to a service center.
1. In standby mode, press and hold the and together
for 5 seconds. will start flashing. Press to return to the
standby mode.
2. Remove the water tank from the appliance. will light up
stably indicating that the empty system function is in process.
3. When the empty system function is completed, the appliance
will switch off automatically.
CAUTION!
After performing EMPTY SYSTEM FUNCTION and
before the next use press the hot water button until
water comes out from spout.
To Next Page
Loading...
