EN 15
07. PREPARING DRINKS
PREPARING ESPRESSO & LUNGO
1. Switch the appliance on by pressing the power on/off button
and make sure that the drip tray (1) is under the coffee
spout (9) and that the water tank is not empty.
2. The appliance will perform auto-rinsing, you can stop it by
pressing . The appliance will go into the standby mode then.
3. Place a cup under the coffee spout and adjust the height of
the spout. If the cup is too wide, you can adjust the position of
the drip tray: thanks to the magnetic holder, you just need to
pull it towards you, and then simply slide it back. The drip tray
remains stable and balanced.
4. Press the Espresso button for strong coffee (30 ml) or
Lungo button for milder coffee (60 ml). The indicator and
backlight will be on while the coffee is being prepared.
5. When the coffee is ready to serve, the appliance will be back
to the standby mode.
PREPARING AMERICANO
1. Make Espresso in a large cup (see “Preparing Espresso &
Lungo”.)
2. Press Hot water button using the same cup. The appliance
will dispense the default quantity of water (150 ml). Your
Americano is ready to serve.
To Next Page
Loading...