11
Condenser
Evaporator
3.2 - 30XW--/30XWH- 1002-1552 30XW-P/30XWHP 1012-1464
NOTES:
• Drawings are not contractually binding. Before design-
ing an installation, consult the certied dimensional
drawings supplied with the unit or available on request.
• For the positioning of the xing points, weight distribu-
tion and centre of gravity coordinates please refer to
the dimensional drawings.
Alldimensionsaregiveninmm.
Required clearances for maintenance
Recommendedspacefortuberemoval
Water inlet
Water outlet
Power supply connection
A B E F G
1002 1870 950 1036 4025 219.1 168.3 3800
1052 1870 950 1036 4025 219.1 168.3 3800
1152 1925 950 1036 4025 219.1 219.1 3800
1252 2051 1512 1162 4730 219.1 219.1 4500
1352 2051 1512 1162 4730 219.1 219.1 4500
1452 2051 1512 1162 4730 219.1 219.1 4500
1552 2051 1512 1162 4730 219.1 219.1 4500
1012 1997 1512 1039 4730 219.1 219.1 4500
1162 1997 1512 1039 4730 219.1 219.1 4500
1314 2051 1512 1162 4730 219.1 219.1 4500
1464 2051 1512 1162 4730 219.1 219.1 4500
1002 1870 950 1036 4025 219.1 168.3 3800
1052 1870 950 1036 4025 219.1 168.3 3800
1154 2925 950 1036 4025 219.1 219.1 3800
1252 2071 1512 1202 4730 219.1 219.1 4500
1352 2071 1512 1202 4730 219.1 219.1 4500
1452 2071 1512 1202 4730 219.1 219.1 4500
1552 2071 1512 1202 4730 219.1 219.1 4500
1012 1997 1512 1039 4730 219.1 219.1 4500
1162 1997 1512 1039 4730 219.1 219.1 4500
1314 2071 1512 1202 4730 219.1 219.1 4500
1464 2071 1512 1202 4730 219.1 219.1 4500
1
2