To view the indoor humidity
reading, press the
HUMIDITY button
HUMIDITY
Press
HUMIDITY
40
Humidify
Setup
I
Current Room Humidity
Requires the Humidity Module (optional accessory) to be installed.
To display the current humidity at the thermostat, press the
HUMIDITY button. The display will then show the current indoor
humidity along with the humidification setpoint (Section 8).
Note: The humidity reading will not appear unless the Humidity
Module has been installed. If the Humidity Module has not been
installed dashes will appear in place of the humidity reading.
Press the HUMIDITY button
again to return the display
to normal operation.
Page 4.3
Viewing the Indoor HumidityViewing the Indoor Humidity
0
NOTE: Due to variations in environmental conditions, it is not always possible
to achieve the desired humidification or dehumidification setpoint.
4
To Next Page
Loading...
