Press the HUMIDITY button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Press
MODE
HUMIDITY
Press
Page 7.2
Turning On/Off the BacklightTurning On/Off the Backlight
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the MODE
button to move back-
wards through the
setup screens.
3
Setup
Select backlight operation:
ON - Light continuously.
OFF - Light for 8 seconds
after a button press.
Select thermostat
operation in degrees
Fahrenheit or Celsius.
C
F
f
4
Setup
Programming the Thermostat to Display
Temperature in Fahrenheit or Celsius
Programming the Thermostat to Display
Temperature in Fahrenheit or Celsius
7
HUMIDITY
MODE
MODE
Press the MODE button. While holding
the MODE, press the HUMIDITY button
to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.
ON
To Next Page
Loading...
