Page 8.1
Additionally, the manufacturer of this thermostat is not responsible
for the fitness of the humidifier and/or installation of said humidifier
connected to this thermostat. Furthermore, the maintenance of the
humidifier components, including but not limited to, the filters and
pads are not the responsibility of the thermostat manufacturer.
The Humidifier Service icon is only a suggestive reminder and
should not take the place of the humidifier manufacturer’s
required maintenance requirements and schedule.
Disclaimer:
The manufacturer of this thermostat cannot be liable for
misinstallation, improper connection or improper programming of
the humidity functions of this thermostat that may result in water
damage or mold growth.
Section 8 Contents:
Installing the Humidity
Module.......................................8.2
Setting a Thermostat Jumper
for Humidity Operation............8.3
Adjusting the Humidification
Setpoint.....................................8.4
NOTE: The humidification functions described in this section will
only be available if a Humidity Module has been properly installed.
SECTION 8
HumidificationHumidification
8
To Next Page
Loading...
