Page 18.1
SECTION 18
AccessoriesAccessories
RJ11 Type Jack
The Accessory Port is located on 
the bottom of the thermostat.
EZ PROGRAMMER (optional accessory) - When the EZ 
    is connected, the thermostat Time Period 
 Advanced Setup Programming can be stored into 
   memory.  This information can then be uploaded to 
    other P374-2700 thermostats.  
 Programmer 
Programming and 
the EZ 
Programmer’s
For more information see the 
    instruction sheet for the EZ Programmer P/N P374-0432.
IR RECEIVER / REMOTE CONTROL (optional accessory) - When the 
    IR Receiver is connected, the thermostat can be controlled using
    an IR Remote Control.  The thermostat may also interface with 
    other wireless systems in your home.  For more information see the 
    instruction sheet for the IR Receiver P/N P374-0431.
ACCESSORY PORT - The RJ11 Jack is used to connect the 
     P374-2700 to the IR Receiver P/N P374-0431 for wireless 
     communication or the EZ Programmer P/N P374-0432 for
     easy downloading or uploading of thermostat information.
18