Carrier 42C Series - Page 37

37
Fig. 31 — 42DC Hi-Performance Hideaway With Plenum With Optional Electric Heat, Bottom Return
Top View
Front View
Right Side View
Drain Pan (Abbreviated View)
Return
Air
Supply
Air
7/8 [22] O.D.
Condensate
Drain
Optional 5/8 [16] O.D.
Tell-Tale Drain Connection
(Available on standard and
extended drain pans.)
Chilled/Hot
Water Supply
and Return
Connections
Optional Drip Lip
Mounting Location
No Valve Pkg
Shipped loose
(See Note d)
Control Box
(See Notes e,h)
Optional Service
Switch
Filter Removal
(Both Sides)
Front Mtd Holes
Rear Mtd Holes
Resilient Mount Grommet
with 3/8 [10] Dia. Hole
Qty 4
E
13
[329]
1-1/8
[28]
2-5/8
[67]
16-3/8
[417]
G
D
1-1/8
[28]
4-1/2
[114]
3-1/8
[79]
1-7/8
[47]
8
[204]
26-1/4
[666]
9-1/4
[236]
7/8
[21]
28-5/8
[727]
3/4
[19]
F
4-1/2
[114]
B
A
Optional
Extended
Drain Pan
1 [26]
1 [25] Supply
Duct Collar
29-1/2
[748]
28-1/2
[722]
Electric Strip
Heater Element
16-1/2
[418]
19
[483]
1 [25] Filter
2-1/2 [65]
14
[355]
16-3/8
[417]
13-3/8
[341]
A’
C
UNIT
SIZE
42DC
DIMENSIONS in. [mm]
a,b,c,d,e,f,g,h
NOTE(S):
a. Right-hand units shown, left-hand opposite.
b. All dimensions are ± .25 [6]. Drawing not to scale.
c. Product specifications are subject to change without notice.
d. Drip lip recommended. Provided when valve package is ordered.
e. Control box size and position may vary. Consult factory.
f. Position may vary.
g. Service access is located on the front of the control box.
h. Knockouts on the bottom and side of the control box for incoming connections.
QUANTITY/UNIT
A A' B C D E F G Blower Motor
06 23 [584] 32 [813] 14 [356]
13-1/2 [343] 17 [432] 21 [533] 25-1/2 [648] 18-3/4 [476] 11
08 28 [711] 37 [940] 19 [483]
13-1/2 [343] 22 [559] 26 [660] 30-1/2 [775] 23-3/4 [603] 11
10 32 [813] 42 [1067] 23 [584]
14-1/2 [368] 26 [660] 30 [762] 34-1/2 [877] 27-3/4 [705] 11
12 37 [940] 47 [1194] 28 [711]
14-1/2 [368] 31 [787] 35 [889] 39-1/2 [1004] 32-3/4 [832] 22
14 42 [1067] 52 [1321] 33 [838]
14-1/2 [368] 36 [914] 40 [1016] 44-1/2 [1131] 37-3/4 [959] 22
16 47 [1194] 56 [1422] 38 [965]
13-1/2 [343] 41 [1041] 45 [1143] 49-1/2 [1258] 42-3/4 [1086] 22
18 52 [1321] 52 [1321] 43 [1092]
14-1/2 [368] 46 [1168] 50 [1270] 54-1/2 [1385] 47-3/4 [1213] 22
20 56 [1422] 66 [1676] 47 [1194]
14-1/2 [368] 50 [1270] 54 [1372] 58-1/2 [1487] 51-3/4 [1314] 22