Carrier 59SC2A - Page 55

ALIGN NOTCHES IN VENT PIPE
COUPLING OVER STAND-OFF
ON ADAPTER. TORQUE LOWER
VENT PIPE ADAPTER WITH GASKET CLAMP 15 LB-IN. WHEN REMAINING
INSTALLED ON FURNACE VENT VENT PIPE iS INSTALLED, TORQUE
PIPE IS CUT FLUSH WITH TOP OF UPPER CLAMP TO 15 LB-IN.
ADAPTER.
59SC2A
VENT PIPE FLUSH WITH ADAPTER VENT PIPE FLUSH SHOWING COUPLING
A11339
Fig. 43 - Vent Pipe Flush with Adaptor
Point elbow down towards
back of furnace
x
12" (256mm) minimum
to
60"(1524 mm) or
1 additional elbow maximum
CASING SIDE ATTACHMENT
COMBUSTION AIR PIPE
(NON-DIRECT VENT)
Li2Foa2
Fig. 44 - Combustion Air Pipe Attachment
55